Made-to-measure toughened granite-textured patterned glass 200
Toughened granite-textured glass, cut to your measurements
Patterned glass 200, also known as granite-textured glass or G200, is a translucent glazing for indoor use. One of its faces has a fine granite-like texture, slightly grainy to the touch: light passes through, but shapes are blurred. It preserves privacy while keeping a room bright.
Plakglass cuts it to your dimensions, finishes the edges and holes, then toughens it: toughened granite-textured glass is around five times more impact-resistant than ordinary glass.
- Thicknesses: 4, 6, 8 or 10 mm
- Dimensions: from 178 x 80 mm (diagonal 250 mm) to 2450 x 1500 mm, made-to-measure shapes and rounds
- Edges: flat polished edge, not sharp
- Safety: glass toughened to standard EN 12150
Configurator: tempered glass patterned glass 200
1Click the shape of your cut-out
Rounded and clipped corners are set in step 3.
Edge, corner and middle notches are set in step 8.
Classic shapes
Shapes with arcs
3- and 4-sided shapes
Shapes with 5 or more sides
2Enter the dimensions
Tip: swap the height and the length if your piece is taller than it is long.
Manufacturing tolerance: -1 / +1 mm All measurements are in millimetres (mm). Overall size of the piece: 100 × 60 cm
3Corner customisation
The corner numbers are marked on the drawing.
4Choose the thickness and the glass
Translucent granite-textured glass
5Edgework
All edges are supplied with a flat polished edge (JPP): smooth, glossy and not sharp.
Polished, glossy and smooth edge face.
45° bevel:7Fixing holes
8Holes, cut-outs and notches
Ref. X and Ref. Y are measured from the left edge and the bottom edge of the glass: to the centre for a round hole or a socket; for a rectangular or oblong cut-out, to the centre of the cut-out, or if you prefer to the bottom left corner (rectangle) or to the centre of the bottom or left semicircle (oblong). Click on the drawing to view it full size.
They ordered their toughened glass
4.93/5 · 1,579 verified reviews for made-to-measure toughened glass
- ★★★★★
“Very responsive supplier, product meeting the requirements in every respect (product quality, dimensions, packaging quality, delivery time, etc...). I recommend!”
Translated from FrenchClear glass 4 mmChristophe B. · April 2025 - ★★★★★
“Very good product, meets expectations and as ordered.”
Translated from FrenchBlack tinted glass 6 mmFrederic E. · April 2025 - ★★★★★
“Fast delivery. Product as described and of good quality.”
Translated from FrenchClear glass 10 mmAdrien R. · April 2025
Verified customer reviews · Société des Avis Garantis
A translucent glass that preserves privacy
Patterned glass 200 is the ideal glazing wherever you want light without being seen: bathroom windows, shower screens, interior glass doors, fanlights, partitions or glass partitions between two rooms. It is also used for furniture and display cabinet doors, with a softer look than clear glass.
More discreet than clear glass and more textured than frosted glass, granite-textured glass hides water marks and fingerprints and is suitable for heavily used rooms.
What thickness of granite-textured glass should I choose?
- 4 mm: furniture door, display cabinet, small interior pane.
- 6 mm: door pane, interior window, glass partition.
- 8 mm: shower screen, partition, standard-size glass door.
- 10 mm: large screens and large glass doors.
All thicknesses of patterned glass 200 can be selected in the configurator, with the price calculated instantly.
Patterned glass 200 specifications
| Appearance | Translucent, fine granite-like texture on one face |
|---|---|
| Other names | Granite-textured glass 200, G200 |
| Glass | Clear |
| Thicknesses | 4, 6, 8 and 10 mm |
| Minimum dimensions | 178 x 80 mm (diagonal 250 mm), diameter 250 mm |
| Maximum dimensions | 2450 x 1500 mm |
| Edges | Flat polished edge, not sharp |
| Anti-limescale treatment | Not available |
| Standard | Toughened glass EN 12150 |
Frequently asked questions about patterned glass 200
What is patterned glass 200?
It is a clear glass with a regular granite-like texture on one face, produced when the glass is rolled. Translucent, it lets light through but blurs shapes. It is also known as granite-textured glass 200 or G200.
Is granite-textured glass opaque?
No, it is translucent: plenty of light passes through it, but only blurred silhouettes can be made out. This is what makes it a popular glazing for bathrooms and interior doors.
What thickness should I choose for a granite-textured glass shower screen?
8 mm is the most common thickness for a shower screen; 10 mm is suitable for large screens. For a door pane or an interior window, 6 mm is enough, and 4 mm for a furniture door.
Which way round should the textured face go?
In a shower, preferably place the smooth face on the water side: it is easier to clean. For a door or a partition, the textured face is generally fitted on the side of the room that is less exposed to dirt.
How do I look after patterned glass 200?
A glass cleaner or soapy water and a microfibre cloth are all you need. On the textured face, a soft brush helps remove deposits from the texture. Avoid abrasive products.
Can granite-textured glass be drilled or recut after delivery?
No: once toughened, the glass can no longer be worked. Holes, notches and cut-outs are positioned in the configurator and made before toughening.
Which standard does toughened patterned glass 200 meet?
It is toughened to European standard EN 12150: around five times stronger than ordinary glass, it shatters into small, blunt pieces if it breaks. It must not be used where there is a risk of falling: laminated glass is required in that case.