8 mm clear glazing - Made-to-measure 8 mm clear toughened glass
8 mm clear toughened glass with polished edges
8 mm clear glass is one of the most widely used types of glazing indoors.
Plakglass offers 8 mm clear glass in a toughened version so that it can be used safely for protection or decoration inside the home.
Thanks to its thickness and strength, 8mm clear toughened glass is suitable for an open-frame table, a stove on legs, a well-supported piece of furniture, or a glass partition.
Made-to-measure 8mm clear glass is also suitable for a shower screen, which we also offer with a one-sided anti-limescale treatment (Timeless).
With 8 mm glazing you can make shelves for your living room, kitchen, bedroom or bathroom, as well as display cabinet shelves, or simply replace old glazing of the same thickness.
Our made-to-measure 8mm clear toughened glass is supplied with flat polished edges. Designed with your safety in mind, 8mm clear toughened glass breaks into small, blunt pieces if it ever breaks.
8 mm clear toughened glass is delivered straight to your home. You can get a quotation for 8 mm clear toughened glass in just a few clicks below.
Configurator: tempered glass clear 8 mm
1Click the shape of your cut-out
Rounded and clipped corners are set in step 3.
Edge, corner and middle notches are set in step 8.
Classic shapes
Shapes with arcs
3- and 4-sided shapes
Shapes with 5 or more sides
2Enter the dimensions
Tip: swap the height and the length if your piece is taller than it is long.
Manufacturing tolerance: -1 / +1 mm All measurements are in millimetres (mm). Overall size of the piece: 100 × 60 cm
3Corner customisation
The corner numbers are marked on the drawing.
4Choose the thickness and the glass
Transparent glass
Surface treatment that limits limescale marks and makes cleaning easier (shower screen, splashback).
5Edgework
All edges are supplied with a flat polished edge (JPP): smooth, glossy and not sharp.
Polished, glossy and smooth edge face.
45° bevel:7Fixing holes
8Holes, cut-outs and notches
Ref. X and Ref. Y are measured from the left edge and the bottom edge of the glass: to the centre for a round hole or a socket; for a rectangular or oblong cut-out, to the centre of the cut-out, or if you prefer to the bottom left corner (rectangle) or to the centre of the bottom or left semicircle (oblong). Click on the drawing to view it full size.
They ordered their clear glass 8 mm
4.95/5 · 232 verified reviews for clear glass 8 mm
- ★★★★★
“Very happy with the product and delivery. I recommend Plakglass. Good value for money”
Translated from FrenchClear glass 8 mmYvonne R. · October 2022 - ★★★★★
“We went for 8 mm for an oval table of 1.70 m x 1.10 m and it's very good.”
Translated from FrenchClear glass 8 mmAnnie E. · August 2022 - ★★★★★
“Two half-tops making a single one on a pine table, the glass gives a bright effect!”
Translated from FrenchClear glass 8 mmClaude L. · June 2022
Verified customer reviews · Société des Avis Garantis