Grey back-painted glass splashbacks and cooker hood splashbacks
Made-to-measure grey splashbacks and cooker hood splashbacks
Pearl, mouse, slate or anthracite: a grey splashback is the safe bet for contemporary kitchens, elegant and easy to match. Grey back-painted glass is a toughened glass with paint applied to the back, giving a deep and perfectly even grey.
Choose a full-length grey splashback or a grey cooker hood splashback behind the hob, cut to your measurements.
- Greys: light, mid or dark
- Finish: gloss or satin matt
- Plus point: hardly shows splashes
Configurator: glass splashback
1Click the shape of your splashback
Rounded and clipped corners are set in step 3.
Edge, corner and middle notches are set in step 8.
Classic shapes
2Enter the dimensions
Tip: swap the height and the length if your piece is taller than it is long.
Manufacturing tolerance: -1 / +1 mm All measurements are in millimetres (mm). Overall size of the piece: 100 × 60 cm
3Corner customisation
The corner numbers are marked on the drawing.
4Choose the glass thickness
5Edgework
All edges are supplied with a flat polished edge (JPP): smooth, glossy and not sharp.
Polished, glossy and smooth edge face.
45° bevel:6Splashback colour
ECO - Plakglass selection (11)
RAL (32)
Pantone (53)
NCS (20)
Colours displayed on screen are indicative: they vary between screens. For a reliable choice, consult a RAL, NCS or Pantone colour chart.
GlassLow-iron (extra clear): true colours and pure whites. Clear: slight green tint, visible mainly in light tones.
Gloss: smooth, reflective surface. Matt: acid-etched front face, satin finish, with no reflections or fingerprints.
7Fixing holes
8Holes, cut-outs and notches
Ref. X and Ref. Y are measured from the left edge and the bottom edge of the glass: to the centre for a round hole or a socket; for a rectangular or oblong cut-out, to the centre of the cut-out, or if you prefer to the bottom left corner (rectangle) or to the centre of the bottom or left semicircle (oblong). Click on the drawing to view it full size.
They ordered their glass splashback
4.91/5 · 337 verified reviews for splashbacks and back-painted glass
- ★★★★★
“Magnificent yellow back-painted glass splashback. Colour and measurements precisely respected, with perfect machining. Thank you very much for your quality work.”
Translated from FrenchLow-iron back-painted glass 6 mmFrancois G. · February 2025 - ★★★★★
“Very good, lovely product. Fully meets my expectations”
Translated from FrenchBack-painted glass 6 mmIsabelle L. · February 2025 - ★★★★★
“Product meets expectations, delivered with a small cleaning wipe. Very well packed to avoid any breakage during transport. Very good. Thank you.”
Translated from FrenchLow-iron back-painted glass 6 mmSiat S. · January 2025
Verified customer reviews · Société des Avis Garantis
Grey cooker hood splashback: understated and easy to live with
An anthracite grey cooker hood splashback is discreet under a stainless steel hood and hides cooking splashes well. In light grey, it brightens the work area. 6 mm toughened glass is suitable for induction, ceramic and gas hobs, with a clearance of at least 10 cm from the flame.
Grey splashbacks, grey cooker hood splashbacks and made-to-measure back-painted glass
Give your kitchen a finish that is both refined and high-performing with a grey splashback or a grey cooker hood splashback in made-to-measure back-painted glass. Elegant and versatile, grey creates a contemporary feel and suits modern kitchens as well as more traditional spaces.
The glass is always toughened: it withstands thermal and mechanical shocks and is suitable behind a hob or near a heat source. The colour, protected on the back of the glass, keeps a lasting shine, or an even satin look in the matt finish.
A grey splashback made to your measurements
Made-to-measure design allows millimetre-precise integration:
- technical cut-outs for sockets, switches or fixings,
- precise fitting around units and appliances,
- custom dimensions to cover the entire preparation area or just the cooker hood area.
Thanks to its non-porous surface, grey back-painted glass is easy to clean: a simple wipe with a cloth removes stains and splashes. It does not fade and keeps its elegance over time.
Possible shades of grey: pearl grey, light grey, silver grey, dove grey, mouse grey, slate grey, concrete grey, taupe grey, graphite grey, anthracite grey, iron grey, basalt grey.
Grey kitchen splashbacks: specifications
| Product | Grey splashback and grey cooker hood splashback in toughened back-painted glass |
|---|---|
| Greys available | Signal grey RAL 7004, anthracite grey RAL 7016, black grey RAL 7021, graphite grey RAL 7024, light grey RAL 7035, silk grey RAL 7044 |
| Recommended glass | Low-iron for light greys, clear for anthracite |
| Finish | Gloss grey or matt grey |
| Thickness | 6 mm for splashbacks, 4 to 19 mm available |
| Size | Made to measure up to 2,900 × 1,800 mm |
| Safety | Toughened to EN 12150, safety film |
| Painting | Plakglass workshop (Brittany) |
Colours close to grey
Frequently asked questions about grey splashbacks and cooker hood splashbacks
Which grey should I choose for a kitchen splashback?
Anthracite grey RAL 7016 and graphite grey RAL 7024 are the most popular: modern, they hardly show splashes. Silk grey RAL 7044 and light grey RAL 7035 brighten a small kitchen while showing dirt less than white.
What colours go with a grey splashback?
Grey pairs with white for light, with wood for warmth and with black for an industrial style. It also sets off an accent colour on the unit doors: mustard yellow, teal blue or sage green.
Is a grey cooker hood splashback suitable for a gas cooker?
Yes: 6 mm toughened glass, resistant to temperature differences of around 200 °C. Position it 10 to 15 cm from the burners. Dark grey has the advantage of hiding any cooking marks.
Clear or low-iron glass for grey back-painted glass?
For pearl grey or light grey, low-iron glass avoids the slight green tinge of standard glass. For anthracite or dark grey, the difference is almost invisible and clear glass is fine.
What standard applies to a grey glass splashback?
The glass is toughened safety glass conforming to standard EN 12150. Painted glass for interior use is covered by standard EN 16477; the grey paint is backed with a safety film.
Gloss or matt grey splashback?
Gloss grey reflects light and makes the room look bigger; matt grey, on frosted glass, gives a mineral look similar to polished concrete, with no reflections or visible marks. Both can be cleaned with a microfibre cloth.