10 mm clear glass - Made-to-measure 10 mm toughened glass
10 mm clear toughened glass with polished edges
10mm clear glass is a fairly thick glass that is widely used in interior design.
Plakglass lets you design your 10 mm toughened glass to measure; it is then made in our workshops, made in France.
10 mm clear toughened glass can be edge-worked before toughening by adding rounded corners or holes. 10 mm clear glass can be used both indoors and outdoors: it is "Securit" glass. Its pale green colour gives 10mm clear toughened glass a raw, vintage look.
A sturdy glass built to last: thanks to its thickness, 10mm clear glass brings a unique decorative asset and real presence to an interior. Perfect on architect's trestles or designer legs, 10mm toughened glass adds a significant touch to your interior design.
Its substantial look makes 10mm toughened glazing a centrepiece of your room. 10 mm clear glass is suitable for use as a desk top, dining table, coffee table or shelves.
It plays a role that is as functional as it is decorative as a sliding door, a shower screen or partition
All our made-to-measure 10mm clear toughened glass is supplied with edges that are not sharp.
Configurator: tempered glass clear 10 mm
1Click the shape of your cut-out
Rounded and clipped corners are set in step 3.
Edge, corner and middle notches are set in step 8.
Classic shapes
Shapes with arcs
3- and 4-sided shapes
Shapes with 5 or more sides
2Enter the dimensions
Tip: swap the height and the length if your piece is taller than it is long.
Manufacturing tolerance: -1 / +1 mm All measurements are in millimetres (mm). Overall size of the piece: 100 × 60 cm
3Corner customisation
The corner numbers are marked on the drawing.
4Choose the thickness and the glass
Transparent glass
Surface treatment that limits limescale marks and makes cleaning easier (shower screen, splashback).
5Edgework
All edges are supplied with a flat polished edge (JPP): smooth, glossy and not sharp.
Polished, glossy and smooth edge face.
45° bevel:7Fixing holes
8Holes, cut-outs and notches
Ref. X and Ref. Y are measured from the left edge and the bottom edge of the glass: to the centre for a round hole or a socket; for a rectangular or oblong cut-out, to the centre of the cut-out, or if you prefer to the bottom left corner (rectangle) or to the centre of the bottom or left semicircle (oblong). Click on the drawing to view it full size.
They ordered their clear glass 10 mm
4.99/5 · 86 verified reviews for clear glass 10 mm
- ★★★★★
“Very good product quality. Dimensions respected.”
Translated from FrenchClear glass 10 mmNicolas C. · August 2026 - ★★★★★
“The product is exactly what we expect.”
Translated from FrenchClear glass 10 mmMarc L. · May 2025 - ★★★★★
“Fast delivery. Product as described and of good quality.”
Translated from FrenchClear glass 10 mmAdrien R. · April 2025
Verified customer reviews · Société des Avis Garantis