Glass cut to size to the millimetre Instant online quote Secure delivery

Products

    Useful pages

      Can't find what you are looking for?

      Configure your glass and get the price instantly.

      Instant quote
      ↑ ↓ to choose, Enter to open, Esc to close

      19 mm clear toughened glazing - Made-to-measure 19 mm clear glass

      4.94/5· 1,132 verified reviewsfor clear glass, all thicknessesSee the reviews
      19 mm clear glass made to measure - 19 mm toughened glass

      19 mm clear toughened glass

      19 mm clear glass is one of the most widely used glazing types for large table tops. Plakglass offers 19 mm clear glass in a toughened version so it can be used in complete safety for protection or decoration, outdoors or inside the home.

      A 19 mm clear glass sheet is transparent, with a float tint (pale green) that is more pronounced because of the considerable thickness of the glass. A large top with a beautiful edge finish. Made-to-measure 19 mm toughened glass is offered at Plakglass at the best price.

      19 mm clear glass shows little flatness deviation after toughening: the greater the thickness, the smaller the flatness deviation.

      Your 19 mm clear toughened glass is delivered straight to your home. Get your 19 mm clear glass quote in just a few clicks below.

      Configurator: tempered glass clear 19 mm

      1Click the shape of your cut-out

      Rounded and clipped corners are set in step 3.

      Edge, corner and middle notches are set in step 8.

      Classic shapes

      2Enter the dimensions

      Tip: swap the height and the length if your piece is taller than it is long.

      Manufacturing tolerance: -1 / +1 mm All measurements are in millimetres (mm). Overall size of the piece: 100 × 60 cm

      3Corner customisation

      The corner numbers are marked on the drawing.

      4Choose the thickness and the glass

      Glass

      Transparent glass

      5Edgework

      All edges are supplied with a flat polished edge (JPP): smooth, glossy and not sharp.

      7Fixing holes

      8Holes, cut-outs and notches

      Ref. X and Ref. Y are measured from the left edge and the bottom edge of the glass: to the centre for a round hole or a socket; for a rectangular or oblong cut-out, to the centre of the cut-out, or if you prefer to the bottom left corner (rectangle) or to the centre of the bottom or left semicircle (oblong). Click on the drawing to view it full size.

      Total incl. VAT
        4.94/5 · 1,132 verified reviews

        They ordered their clear glass

        4.94/5 · 1,132 verified reviews for clear glass, all thicknesses

        Verified customer reviews · Société des Avis Garantis